Home » , , , » How to Setup PS4 Elgato Game Capture HD60

How to Setup PS4 Elgato Game Capture HD60

Written By admin on Thursday, 27 August 2015 | 01:38

PlayStation 4 (PS4) and Elgato Game Capture HD60 setup.

Elgato Game Capture HD60 connects to the PlayStation 4 using HDMI. It can passthrough video to a TV set also using HDMI. An HDMI cable is included in the box.

Before you set things up, make sure to connect your PlayStation 4 directly to your TV set or display via HDMI, without using Elgato Game Capture HD60.

Then, visit the Settings > System section of the PlayStation 4 interface, and turn off Enable HDCP.
 
  
After that, you can use your PlayStation 4 with Elgato Game Capture HD60.

Inputs and Outputs



 
Elgato Game Capture HD60 has two inputs, and two outputs:

HDMI In

This connects to a game console or other video source. Signals protected by HDCP can't be used.

Analog Audio In

This connects to an analog audio source, using an 3.5mm cable. This is audio line in, and not a microphone port.

USB Out

This sends the H.264 encoded video to your computer via USB 2.0. The signal is delayed by a few seconds from live. The USB cable also powers the Elgato Game Capture HD60 hardware.

HDMI Out

This sends the HDMI signal in real time to a TV or display, so you can play your game normally.

Setup Steps:
  • Download and install the Elgato Game Capture HD software, version 2.0 or higher:
  • https://www.elgato.com/en/game-capture-hd-support
  • Connect your PlayStation 4 to the HDMI In of Elgato Game Capture HD60 via an HDMI cable
  • Connect the HDMI Out of Elgato Game Capture HD60 to your TV or display via an HDMI cable.
  • Connect the Elgato Game Capture HD60 to your computer via a USB cable.
  • If you don't turn off HDCP before setting things up, and try to play a video game, the signal may flash on and off, or you will only see a black screen.
PlayStation 4 (PS4): General HDMI output

Content other than gameplay may still be encrypted with HDCP (High-bandwidth Digital Content Protection). In that case,Elgato Game Capture HD60 will not be able to capture that content via HDMI.

The PlayStation 4 uses HDCP protection when watching a purchased movie, or using services like Netflix or Hulu. Therefore, Elgato Game Capture HD60 won't be able to capture that content.

Instead, you will get an error message that states:

Cannot start the application.

  • You must turn on [Settings] > [System] > [Enable HDCP]
  • Troubleshooting - No Image Appears On The TV
  • If your TV only supports 1080i or 720p, and not 1080p, then you may not get a video image when Elgato Game Capture HD60 is first connected. The video may still appear in the software, but not on your TV.
  • The solution would be to set your PlayStation 4 to output video to 720p or 1080i - whatever format your TV can support.
Improving Performance

Elgato Game Capture HD software works well if your computer exceeds the basic System Requirements.

If your computer barely meets the minimum System Requirements, then performance may suffer, especially if you are trying to do a number of things at the same time.

This article includes a few steps you can take to improve performance in such situations:

Improve Elgato Game Capture HD software performance
Share this article :

Post a Comment

Related Posts Plugin for WordPress, Blogger...